Submission and Publication Guidelines
REGULATIONS
On Manuscript Preparation, Submission, and Plagiarism Control for Articles Published in the DTU Journal of Science and Technology
CHAPTER I
GENERAL PROVISIONS
Article 1. Scope of Application
These Regulations govern the presentation of manuscripts and plagiarism control applicable to authors and reviewers collaborating with the DTU Journal of Science and Technology.
Article 2. Definitions
-
Manuscript means a handwritten, typed, or electronically produced version of a work or document intended for publication.
-
Scientific article means a report written and published in a peer-reviewed journal that describes original research findings. A scientific article is not merely a product of knowledge; scientific articles also provide a basis for evaluating the professional capacity and scientific productivity of researchers.
-
Author means a person who directly creates part or all of a literary, artistic, or scientific work. Where two or more persons directly create a work with the intention that their contributions be combined into a complete whole, such persons are considered co-authors.
-
Reviewer means an expert who devotes time to helping improve the quality of manuscripts under review by providing comments and advice to the Author.
-
Plagiarism means the use of another person's work in one's own work without complying with the applicable provisions of intellectual property law, regulations of the Ministry of Education and Training, and the prohibited acts specified in Chapter III.
CHAPTER II
MANUSCRIPT PREPARATION AND SUBMISSION GUIDELINES
Article 3. General Manuscript Formatting
Articles accepted for publication must present new research with scientific and practical significance in the fields of science and technology and must not have been previously published in any medium or in any form.
All forms of plagiarism are strictly prohibited (see CHAPTER III).
When submitting a manuscript, the Author is requested to include the author information together with the original manuscript. The Author Information Form is available for download on the homepage of the DTU Journal of Science and Technology.
The manuscript must be prepared using Microsoft Word, formatted in a single column, and must not exceed 10 A4 pages (21 × 29.7 cm) in total.
Font: The manuscript must be prepared using Unicode encoding and Times New Roman throughout, including in figures, tables, diagrams, and formulas.
Font size: 12 pt, justified alignment, First line: 0.39, Before: 0 pt, After: 0 pt, Line Spacing: Single.
Other font sizes: Specific font sizes apply to the Abstract and References sections.
Article 4. Article Title
The Vietnamese and English titles of the manuscript must be written in lowercase letters, centered, without bold formatting, and without a period at the end of the title. For English titles, the initial letter of each word is capitalized except for prepositions, articles, and short conjunctions.
Examples:
DTU Journal of Science and Technology (lowercase, centered)
DTU Journal of Science and Technology (lowercase, centered)
Note:
For an article written in Vietnamese, the Vietnamese title is placed above the English title. Conversely, for an article written in English, the English title is placed above the Vietnamese title.
Article 5. Main Content
1. Abstract
For an article written in Vietnamese, the Vietnamese “Tóm tắt” and “Từ khóa” sections are placed above the English “Abstract” and “Keywords” sections. Conversely, for an article written in English, the English “Abstract” and “Keywords” sections are placed above the Vietnamese “Tóm tắt” and “Từ khóa” sections.
The headings “Tóm tắt” and “Abstract” must be in 12-point font, regular type, bold, and aligned with the left margin.
This section should briefly introduce the research objectives and the results achieved in the article in both Vietnamese and English. References must not be cited in the abstract. (The body of the Abstract uses 10-point font, regular type, aligned with the left margin.)
Keywords: Immediately below each Vietnamese “Tóm tắt” and English “Abstract” section, the keywords must be presented in 10-point regular font. Only “Từ khóa:” and “Keywords:” are italicized. Keywords must be separated by commas (,) and no period should be placed at the end of the keyword line.
2. Main Content
An article generally contains approximately four to five major sections. Section headings are numbered using Arabic numerals (1., 2., 3., etc.). Subsections are numbered sequentially following the major section or the immediately preceding section number, with a period after the number, and formatted according to the heading level using bold/bold italic/italic/regular type, for example: 1.1., 1.1.1., 2.1., 2.1.1., etc.
Major and minor section titles must be specific, concise, and contain information closely related to the content of the respective section.
Do not use automatic Enter formatting.
Examples:
1. Section heading in lowercase, bold, 12-point font (Problem Statement/Introduction)
1.1. Section heading in lowercase, bold italic, 12-point font
1.1.1. Section heading in lowercase, italic, 12-point font
1.1.1.1 Section heading in lowercase, 12-point font
1.2. ……..
1.2.1. ……
3. References
For reference formatting, the DTU Journal of Science and Technology follows the APA style of the American Psychological Association (APA).
a. Presentation
-
The heading “Tài liệu tham khảo/References” must be in 12-point font, regular type, bold, and justified.
-
Reference numbers must be enclosed in square brackets, for example [1], [2], etc. These numbers must be placed immediately at the point of citation in the article. The same numbers are then listed in the References section at the end of the article. References are arranged alphabetically according to the first letter of the author's name (or the first author in the case of multiple authors). References by the same author are arranged chronologically.
-
A distinction must be made between references and footnotes. Each serves a different function, and the formatting of each is also different: references are placed in square brackets on the same line as the text (e.g., “…Vietnam” [1]). Footnotes are not placed in square brackets but are indicated above the word requiring explanation in a smaller font (e.g., Vietnam¹). Reference numbers are listed in the References section, whereas footnote numbers are explained at the bottom of the page. Footnotes provide supplementary information to readers; therefore, they should be concise, focus on a single topic, and, as far as possible, be limited to a short paragraph.
-
References are arranged alphabetically by the authors' names, numbered consecutively, and the numbers are enclosed in square brackets – []; 11-point regular font.
b. Formatting Authors' Names
-
For foreign authors: Surname, followed by the initials of the remaining names in uppercase letters with periods. Example: Vlardymiar Ilyich Lenin is written as Lenin, V.I.
-
For Vietnamese authors: Given name, followed by the initials of the surname and middle name in uppercase letters with periods. Example: Ngô Bảo Châu is written as Châu, N.B.
c. Books
Author(s) of the book. (Year of publication). Title of book. Place of publication: Publisher.
d. Articles in Scientific Journals
Author(s) of the article. (Year of publication). Title of article. Journal name, italicized volume (issue), page number(s). DOI: xx.xxxxxxxxxx (if available).
e. Articles in Conference Proceedings
Author(s). (Year of publication). Title of paper. Title of conference proceedings, location and year of the conference in italics (pp. page number). Place of publication: Publisher.
(If the proceedings are issued solely by the Organizing Committee and not through a publisher, information about the place of publication and publisher is not required.)
f. Newspaper Articles
Author(s). (Day, month, year of publication). Title of article. Newspaper title in italics, page number.
g. Theses and Dissertations
Author. (Year of thesis/dissertation publication). Title of thesis/dissertation in italics (Doctoral dissertation/Master's thesis, educational institution, location).
h. Internet Sources
Author(s) (Year the document was created or updated). Title of document in italics. Accessed day/month/year, from http://www...
Article 6. Manuscript Submission
The manuscript and author information must be submitted directly to the following email address: tapchikhcn@duytan.edu.vn.
CHAPTER III
PLAGIARISM CONTROL AND HANDLING OF PLAGIARISM
Article 7. Forms of Plagiarism
-
Using passages of text, information, data, or images from another person's work in one's own work without indicating the source of the cited work.
-
Providing inaccurate information about the author or the source of the cited information.
-
Failing to cite the original source when changing or rearranging the words, sentences, passages, or ideas of another author; combining words, sentences, or passages from different sources and revising them in one's own article; or changing words, phrases, or sentences while retaining the original structure of the paragraph or article.
-
Paraphrasing passages or content from another person's work in one's own language without citing the source of the work used; or summarizing the content of another person's work without citing its source.
-
Citing one or more works by other authors to form one's own work where the cited material accounts for 20% or more of the content of the work, even where the applicable citation requirements have been properly followed. This provision does not apply to reasonable quotations of a work that do not distort the author's meaning and are used for commentary or illustration in one's own work.
-
Appropriating another person's work and presenting it as one's own:
a. Copying an entire work created by another person and presenting it as one's own work, including cases in which the work is commissioned or another person is asked to write it on one's behalf;
b. Translating or expressing all or part of a work from a foreign language into Vietnamese or vice versa to constitute at least 20% of one's own work without clearly indicating information about the original work. -
Using more than 30% of one's previously published works in new works authored or co-authored by oneself without indicating the source, constituting self-plagiarism.
-
Other forms of plagiarism as provided by law.
Article 8. Responsibilities of Individuals and Units Involved in Plagiarism Control
Responsibilities of Authors and Reviewers:
Authors subject to Article 2 of these Regulations are responsible for strictly complying with the provisions of these Regulations, ensuring scientific integrity and compliance with the Law on Intellectual Property.
Reviewers subject to Article 2 of these Regulations are encouraged to notify the Journal and provide evidence of suspected cases of plagiarism or when potential conflicts of interest are identified.
Article 9. Measures for Handling Plagiarism
Depending on the form and severity of the plagiarism, violations may be subject to one or more of the following measures:
-
Discontinuation of manuscript processing.
-
Suspension of collaboration with the author who commits the violation.
CHAPTER IV
IMPLEMENTATION PROVISIONS
Article 10. Effectiveness
These Regulations shall take effect from the date of signing.
